Keepalived学习笔记,主主架构实例

实例拓扑图:


LVS(Linux Virtual Server):Linux设想服务器,这里通过keepalived作为负载均衡器
大切诺基S(Real Server):真实服务器
V奥迪Q3RP(Virtual Router Redundancy Protocol): 虚构路由冗余商讨, 解决局域网中配置静态网关出现单点失效现象的路由协议
图片 1

图片 2

 

DEnclave1和D昂Cora2布署keepalived和lvs作主从框架结构或主主架构,昂科威S1和中华VS2计划nginx搭建web站点。

1 Keepalived是如何,有哪些意义?
1.1 Keepalived的定义
Keepalived 是二个依照VHighlanderRP左券来兑现的LVS高可用方案
1.2 Keepalived的作用
1.2.1 通过IP漂移完毕高可用
主副LVS分享多少个设想IP,同一时间只有多少个LVS据有VIP并对外提供服务,若该LVS不可用,则VIP漂移至另后生可畏台LVS并对外提供劳务;
1.2.2 对Porsche911S集群举行景况监察和控制
若HighlanderS不可用,则keepalived将其从集群中摘除,若安德拉S苏醒,则keepalived将其重新参预集群中。
2 Keepalived有两种情势,各种方式的相同点和分化点是什么样?
2.1 Keepalived的格局体系
Keepalived有3种格局:NAT(地址调换卡塔 尔(英语:State of Qatar);DCR-V(直接路由卡塔 尔(阿拉伯语:قطر‎;TUN(隧道卡塔 尔(英语:State of Qatar)
2.2 Keepalived的各种方式的介绍
2.2.1 NAT
亮点:集群中的奥迪Q7S能够利用此外帮助TCP/IP操作系统,TiggoS能够分配Internet的保留私有地址,独有LVS必要多少个法定的IP地址。
劣势:扩张性有限。当库罗德S节点增加到二十个或更加的多时,LVS将变为全部体系的瓶颈,因为具备的号召包和应对包都急需经过LVS再生。
2.2.2 TUN
小编们开掘,非常多Internet服务(比方WEB服务器卡塔尔国的呼吁包超级短小,而应答包平常比非常大。
优点:LVS只承受将呼吁包分发给SportageS,而LX570S将回应包直接发放客商。所以,LVS能管理很伟大的央求量,这种办法,意气风发台载荷均衡能为凌驾100台的中华VS服务,LVS不再是系统的瓶颈。
劣势:然则,这种措施索要持有的服务器帮忙"IP Tunneling"(IP Encapsulation)公约,作者仅在Linux系统上落到实处了这么些。
2.2.3 DR
优点:和TUN相仿,LVS也只是散发央求,应答包通过独立的路由方法再次回到给顾客端。与TUN比较,DEvoque这种落成格局无需隧道结构,因而得以接受大超级多操作系统做为EscortS。
不足:要求LVS的网卡必得与奔驰M级S的网卡在多个网段上
3 差异情势的布署格局,验证办法分别是何等?
3.1 基本的条件须要
需要2台LVS和n(n>=2)台RS
3.1.1 LVS
设置ipvsadm(LVS管理工科具卡塔尔和keepalived;
开启路由转载功效:
vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
验证:
sysctl -p
net.ipv4.ip_forward = 1
3.1.2 RS
安装httpd(用于最后测量检验卡塔 尔(英语:State of Qatar)
3.2 NAT方式配置
3.2.1 处境概述
操作系统 负载均衡格局 VIP NVIP
RHEL7.4 NAT 193.168.140.80 192.168.102.165

介意:各节点的日子须求一块(ntpdate ntp1.aliyun.com卡塔尔国;关闭firewalld(systemctl stop firewalld.service,systemctl disable firewalld.service卡塔尔国,设置selinux为permissive(setenforce 0卡塔 尔(英语:State of Qatar);同时确认保障各网卡接济MULTICAST(多播卡塔 尔(英语:State of Qatar)通讯。

LVS1 LVS2 RS1 RS2
ens3:192.168.102.161 ens3:192.168.102.162 ens3:192.168.102.163 ens3:192.168.102.164
ens4:193.168.140.79 ens4:193.168.140.83 网关:192.168.102.165 网关:192.168.102.165

通过命令ifconfig能够查见到是还是不是开启了MULTICAST:

3.2.2 LVS
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
qingean@163.com #故障接受联系人
}
notification_email_from admin@test.com #故障发送给旁人
smtp_server 127.0.0.1 #本机发送邮件
smtp_connect_timeout 30
router_id LVS_MASTER #BACKUP上更换为LVS_BACKUP
}
vrrp_instance VI_1 {
state MASTER #BACKUP上校订为BACKUP
interface ens4
virtual_router_id 51 #虚构路由标记,主从近似
priority 100 #BACKUP上退换为90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111 #骨干认证密码必得大器晚成致
}
virtual_ipaddress {
193.168.140.80 #虚拟IP(VIP)
}
}
vrrp_instance LAN_GATEWAY { #概念网关
state MASTER #BACKUP上改造为BACKUP
interface ens3
virtual_router_id 62 #设想路由ID,主从相符
priority 100 #BACKUP上修改进改为90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress { #ens3网关虚构IP
192.168.102.165
}
}
virtual_server 192.168.102.165 80 { #概念内网网关设想IP和端口
delay_loop 6 #检查RS时间,单位秒
lb_algo rr #设置负载调整算法,轮叫(rr)、加权轮叫(wrr)、最小连接(lc)、加权最小连接(wlc)、基于局地性最小连接(lblc)、带复制的依靠局地性起码链接(lblcr)、目标地址散列(dh)和源地址散列(sh)
lb_kind NAT #安装LVS负载均衡NAT方式
persistence_timeout 50 #同生龙活虎IP的一而再接二连三60秒内被分配到相像台实在服务器(测量检验时建议改为0)
protocol TCP #选拔TCP合同检查索罗德S状态
real_server 192.168.102.161 80 { #率先个网关节点
weight 3 #节点权重值
TCP_CHECK { #健检方式
connect_timeout 3 #连天超时
nb_get_retry 3 #重试次数
delay_before_retry 3 #重试间距/S
}
}
real_server 192.168.102.162 80 { #第一个网关节点
weight 3
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
virtual_server 193.168.140.80 80{ #概念虚构IP
delay_loop 6
lb_algo rr
lb_kind NAT
persistence_timeout 50
protocol TCP
real_server 192.168.102.163 80 { #第一个RS
weight 3
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.102.164 80 { #第二个RS
weight 3
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
3.2.3 RS
为持有PRADOS增添网关为192.168.102.165:
vim /etc/sysconfig/network-scripts/ifcfg-ens3
GATEWAY=192.168.102.165
重启; 使用route –n查看是不是中标
IPVS connection entries
pro expire state source virtual destination
TCP 01:54 FIN_WAIT 10.167.225.60:53882 193.168.140.80:80 192.168.102.163:80
TCP 00:37 NONE 10.167.225.60:0 193.168.140.80:80 192.168.102.163:80

       图片 3

3.3 DOdyssey形式配置
3.3.1 情状概述
操作系统 负载均衡形式 VIP
RHEL7.4 DR 193.168.140.80

keepalived的主干架构

LVS1 LVS2 RS1 RS2
ens4:193.168.140.79 ens4:193.168.140.83 ens4:193.168.140.152 ens4:193.168.140.224

搭建RS1:

[root@RS1 ~]# yum -y install nginx   #安装nginx
[root@RS1 ~]# vim /usr/share/nginx/html/index.html   #修改主页
    <h1> 192.168.4.118 RS1 server </h1>
[root@RS1 ~]# systemctl start nginx.service   #启动nginx服务
[root@RS1 ~]# vim RS.sh   #配置lvs-dr的脚本文件
    #!/bin/bash
    #
    vip=192.168.4.120
    mask=255.255.255.255
    case $1 in
    start)
        echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
        echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
        ifconfig lo:0 $vip netmask $mask broadcast $vip up
        route add -host $vip dev lo:0
        ;;
    stop)
        ifconfig lo:0 down
        echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
        echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
        ;;
    *) 
        echo "Usage $(basename $0) start|stop"
        exit 1
        ;;
    esac
[root@RS1 ~]# bash RS.sh start

3.3.2 LVS
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
qingean@163.com
}
notification_email_from admin@test.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_MASTER
}
vrrp_instance VI_1 {
state MASTER #BACKUP上退换为BACKUP
interface ens4
virtual_router_id 51
priority 100 #BACKUP上改造为90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
193.168.140.80
}
}
virtual_server 193.168.140.80 80 {
delay_loop 6
lb_algo rr
lb_kind DR
nat_mask 255.255.255.255
protocol TCP
real_server 193.168.140.152 80 {
weight 10
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 193.168.140.224 80 {
weight 10
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}

参照揽胜极光S1的布置搭建奥迪Q7S2。

3.3.3 RS
为所有RS修改sysctl.conf
net.ipv4.conf.lo.arp_ignore= 1
net.ipv4.conf.lo.arp_announce= 2
net.ipv4.conf.all.arp_ignore= 1
net.ipv4.conf.all.arp_announce= 2
net.ipv4.ip_forward= 1
执行/sbin/ifconfig lo:0 193.168.140.80 broadcast 193.168.140.80 netmask 255.255.255.255
可用route –n查看是或不是成功
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 193.168.1.1 0.0.0.0 UG 100 0 0 ens4
193.168.0.0 0.0.0.0 255.255.0.0 U 100 0 0 ens4
193.168.140.80 0.0.0.0 255.255.255.255 UH 0 0 0 lo
若不成事实践/sbin/route add -host 193.168.140.80 dev lo:0
3.4 验证措施
3.4.1 全体机器关闭防火墙:
systemctl stop firewalld
3.4.2 全部PAJEROS写入测验页和开启httpd服务
RS1:echo “RS1″ > /var/www/html/index.html
RS2:echo “RS2″ > /var/www/html/index.html
systemctl start httpd
3.4.3 主副LVS开启keepalived服务
systemctl start keepalived
3.4.4 访问
浏览器访谈
刷新会轮换展现奔驰M级S1或揽胜S2
3.4.5 查看当前测量检验机的拜候乞请被转载到哪个服务器
ipvsadm –lcn
IPVS connection entries
pro expire state source virtual destination
TCP 01:54 FIN_WAIT 10.167.225.60:53882 193.168.140.80:80 192.168.102.163:80
TCP 00:37 NONE 10.167.225.60:0 193.168.140.80:80 192.168.102.163:80
3.4.6 测试
效仿宕掉主LVS,服务器照常专业,再宕掉Web1,当时只博览会示Web2,那样就贯彻IP负载均衡,高可用集群。当主LVS恢复生机后,会切换来主动服务器,借使Keepalived监察和控制模块检验web故障恢复生机后,苏醒的主机又将此节点参与集群系统中。

搭建DR1:

[root@DR1 ~]# yum -y install ipvsadm keepalived   #安装ipvsadm和keepalived
[root@DR1 ~]# vim /etc/keepalived/keepalived.conf   #修改keepalived.conf配置文件
    global_defs {
       notification_email {
         root@localhost
       }
       notification_email_from keepalived@localhost
       smtp_server 127.0.0.1
       smtp_connect_timeout 30
       router_id 192.168.4.116
       vrrp_skip_check_adv_addr
       vrrp_mcast_group4 224.0.0.10
    }

    vrrp_instance VIP_1 {
        state MASTER
        interface eno16777736
        virtual_router_id 1
        priority 100
        advert_int 1
        authentication {
            auth_type PASS
            auth_pass %&hhjj99
        }
        virtual_ipaddress {
          192.168.4.120/24 dev eno16777736 label eno16777736:0
        }
    }

    virtual_server 192.168.4.120 80 {
        delay_loop 6
        lb_algo rr
        lb_kind DR
        protocol TCP

        real_server 192.168.4.118 80 {
            weight 1
            HTTP_GET {
                url {
                  path /index.html
                  status_code 200
                }
                connect_timeout 3
                nb_get_retry 3
                delay_before_retry 3
            }
        }
        real_server 192.168.4.119 80 {
            weight 1
            HTTP_GET {
                url {
                  path /index.html
                  status_code 200
                }
                connect_timeout 3
                nb_get_retry 3
                delay_before_retry 3
            }
         }
    }
[root@DR1 ~]# systemctl start keepalived
[root@DR1 ~]# ifconfig
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.116  netmask 255.255.255.0  broadcast 192.168.4.255
            inet6 fe80::20c:29ff:fe93:270f  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:93:27:0f  txqueuelen 1000  (Ethernet)
            RX packets 14604  bytes 1376647 (1.3 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 6722  bytes 653961 (638.6 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    eno16777736:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.120  netmask 255.255.255.0  broadcast 0.0.0.0
            ether 00:0c:29:93:27:0f  txqueuelen 1000  (Ethernet)
[root@DR1 ~]# ipvsadm -ln
    IP Virtual Server version 1.2.1 (size=4096)
    Prot LocalAddress:Port Scheduler Flags
      -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
    TCP  192.168.4.120:80 rr
      -> 192.168.4.118:80             Route   1      0          0         
      -> 192.168.4.119:80             Route   1      0          0

DKoleos2的搭建基本同DRubicon1,主要修改一下陈设文件中/etc/keepalived/keepalived.conf的state和priority:state BACKUP、priority 90. 同不正常候我们发掘作为backup的D奥迪Q52未有启用eno16777736:0的网口:

图片 4

顾客端进行测量试验:

[root@client ~]# for i in {1..20};do curl http://192.168.4.120;done   #客户端正常访问
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>

[root@DR1 ~]# systemctl stop keepalived.service   #关闭DR1的keepalived服务

[root@DR2 ~]# systemctl status keepalived.service   #观察DR2,可以看到DR2已经进入MASTER状态
● keepalived.service - LVS and VRRP High Availability Monitor
   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; disabled; vendor preset: disabled)
   Active: active (running) since Tue 2018-09-04 11:33:04 CST; 7min ago
  Process: 12983 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
 Main PID: 12985 (keepalived)
   CGroup: /system.slice/keepalived.service
           ├─12985 /usr/sbin/keepalived -D
           ├─12988 /usr/sbin/keepalived -D
           └─12989 /usr/sbin/keepalived -D

Sep 04 11:37:41 happiness Keepalived_healthcheckers[12988]: SMTP alert successfully sent.
Sep 04 11:40:22 happiness Keepalived_vrrp[12989]: VRRP_Instance(VIP_1) Transition to MASTER STATE
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: VRRP_Instance(VIP_1) Entering MASTER STATE
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: VRRP_Instance(VIP_1) setting protocol VIPs.
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: Sending gratuitous ARP on eno16777736 for 192.168.4.120
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: VRRP_Instance(VIP_1) Sending/queueing gratuitous ARPs on eno16777736 for 192.168.4.120
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: Sending gratuitous ARP on eno16777736 for 192.168.4.120
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: Sending gratuitous ARP on eno16777736 for 192.168.4.120
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: Sending gratuitous ARP on eno16777736 for 192.168.4.120
Sep 04 11:40:23 happiness Keepalived_vrrp[12989]: Sending gratuitous ARP on eno16777736 for 192.168.4.120

[root@client ~]# for i in {1..20};do curl http://192.168.4.120;done   #可以看到客户端正常访问
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>
<h1> 192.168.4.119 RS2 server</h1>
<h1> 192.168.4.118 RS1 server </h1>

keepalived的主主架构

 修改福特ExplorerS1和ENVISIONS2,增多新的VIP:

[root@RS1 ~]# cp RS.sh RS_bak.sh
[root@RS1 ~]# vim RS_bak.sh   #添加新的VIP
    #!/bin/bash
    #
    vip=192.168.4.121
    mask=255.255.255.255
    case $1 in
    start)
        echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
        echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
        ifconfig lo:1 $vip netmask $mask broadcast $vip up
        route add -host $vip dev lo:1
        ;;
    stop)
        ifconfig lo:1 down
        echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
        echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
        ;;
    *)
        echo "Usage $(basename $0) start|stop"
        exit 1
        ;;
    esac
[root@RS1 ~]# bash RS_bak.sh start
[root@RS1 ~]# ifconfig
    ...
    lo:0: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 192.168.4.120  netmask 255.255.255.255
            loop  txqueuelen 0  (Local Loopback)

    lo:1: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 192.168.4.121  netmask 255.255.255.255
            loop  txqueuelen 0  (Local Loopback) 
[root@RS1 ~]# scp RS_bak.sh root@192.168.4.119:~
root@192.168.4.119's password: 
RS_bak.sh                100%  693     0.7KB/s   00:00

[root@RS2 ~]# bash RS_bak.sh   #直接运行脚本添加新的VIP 
[root@RS2 ~]# ifconfig
    ...
    lo:0: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 192.168.4.120  netmask 255.255.255.255
            loop  txqueuelen 0  (Local Loopback)

    lo:1: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 192.168.4.121  netmask 255.255.255.255
            loop  txqueuelen 0  (Local Loopback)

修改DR1和DR2:

[root@DR1 ~]# vim /etc/keepalived/keepalived.conf   #修改DR1的配置文件,添加新的实例,配置服务器组
    ...
    vrrp_instance VIP_2 {
        state BACKUP
        interface eno16777736
        virtual_router_id 2
        priority 90
        advert_int 1
        authentication {
            auth_type PASS
            auth_pass UU**99^^
        }
        virtual_ipaddress {
            192.168.4.121/24 dev eno16777736 label eno16777736:1
        }
    }

    virtual_server_group ngxsrvs {
        192.168.4.120 80
        192.168.4.121 80
    }
    virtual_server group ngxsrvs {
        ...
    }
[root@DR1 ~]# systemctl restart keepalived.service   #重启服务
[root@DR1 ~]# ifconfig   #此时可以看到eno16777736:1,因为DR2还未配置
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.116  netmask 255.255.255.0  broadcast 192.168.4.255
            inet6 fe80::20c:29ff:fe93:270f  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:93:27:0f  txqueuelen 1000  (Ethernet)
            RX packets 54318  bytes 5480463 (5.2 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 38301  bytes 3274990 (3.1 MiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    eno16777736:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.120  netmask 255.255.255.0  broadcast 0.0.0.0
            ether 00:0c:29:93:27:0f  txqueuelen 1000  (Ethernet)

    eno16777736:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.121  netmask 255.255.255.0  broadcast 0.0.0.0
            ether 00:0c:29:93:27:0f  txqueuelen 1000  (Ethernet)
[root@DR1 ~]# ipvsadm -ln
    IP Virtual Server version 1.2.1 (size=4096)
    Prot LocalAddress:Port Scheduler Flags
      -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
    TCP  192.168.4.120:80 rr
      -> 192.168.4.118:80             Route   1      0          0         
      -> 192.168.4.119:80             Route   1      0          0         
    TCP  192.168.4.121:80 rr
      -> 192.168.4.118:80             Route   1      0          0         
      -> 192.168.4.119:80             Route   1      0          0

[root@DR2 ~]# vim /etc/keepalived/keepalived.conf   #修改DR2的配置文件,添加实例,配置服务器组
    ...
    vrrp_instance VIP_2 {
        state MASTER
        interface eno16777736
        virtual_router_id 2
        priority 100
        advert_int 1
        authentication {
            auth_type PASS
            auth_pass UU**99^^
        }
        virtual_ipaddress {
            192.168.4.121/24 dev eno16777736 label eno16777736:1
        }
    }

    virtual_server_group ngxsrvs {
        192.168.4.120 80
        192.168.4.121 80
    }
    virtual_server group ngxsrvs {
        ...
    }
[root@DR2 ~]# systemctl restart keepalived.service   #重启服务
[root@DR2 ~]# ifconfig
    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.117  netmask 255.255.255.0  broadcast 192.168.4.255
            inet6 fe80::20c:29ff:fe3d:a31b  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:3d:a3:1b  txqueuelen 1000  (Ethernet)
            RX packets 67943  bytes 6314537 (6.0 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 23250  bytes 2153847 (2.0 MiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    eno16777736:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.4.121  netmask 255.255.255.0  broadcast 0.0.0.0
            ether 00:0c:29:3d:a3:1b  txqueuelen 1000  (Ethernet)
[root@DR2 ~]# ipvsadm -ln
    IP Virtual Server version 1.2.1 (size=4096)
    Prot LocalAddress:Port Scheduler Flags
      -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
    TCP  192.168.4.120:80 rr
      -> 192.168.4.118:80             Route   1      0          0         
      -> 192.168.4.119:80             Route   1      0          0         
    TCP  192.168.4.121:80 rr
      -> 192.168.4.118:80             Route   1      0          0         
      -> 192.168.4.119:80             Route   1      0          0 

顾客端测量检验:

[root@client ~]# for i in {1..20};do curl http://192.168.4.120;done
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
[root@client ~]# for i in {1..20};do curl http://192.168.4.121;done
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>
    <h1> 192.168.4.119 RS2 server</h1>
    <h1> 192.168.4.118 RS1 server </h1>

 

本文由澳门威斯尼人平台登录发布于 操作系统,转载请注明出处:Keepalived学习笔记,主主架构实例

相关阅读